Lightblocks Ply Tops

Size: Custom made to your specification per below

* Round: 295DIA - 1195mm DIA

* Square: 395 - 1195mm SQR

Material board size: 2400L x 1200mm W 

Thickness: 21mm 

Table tops can be made to custom sizes inside above measurements (single pieces) and larger tops can be accommodated with joins or custom sheet sizes (additional fees may apply, please contact us to discuss). 

Tops can be fitted to any of the Jarvis table bases or stools for you, or ordered on their own separately. 

Edge: Pencil round or Aris

Features: The translucent thickness of Lightblocks gives unique light   reflection, depth and colour appearance (please request samples to   check colour prior to ordering). Fully refinishable for durable lifespan in       commercial environments

Composition: 3mm Lightblocks soft   touch resin with matt surface applied to 18mm AA grade plywood.

Optional: Clear satin seal to underside of plywood or just plywood edge (highly recommended in food service environments). Optional pigmented stains to the plywood feature edge. 

Samples: Available on request  

Suitability: Indoor use only

Lead time: Indicatively 3-4 weeks (subject to project size)

Lightblocks Board on ply substrate: Select from the standard colour range with 22 options plus 5 metallics. Custom colours may be specified per Dulux paint colours with no minimum order, (set up fees may apply)

Wipe down using a solution of warm water and non-abrasive, pH neutral detergent solution and a soft cloth or chamois.

Maintenance: Light refinishing if there is only a light scratch can be achieved by using rubbing the area in a random circular motion with a fine steel scouring pad (Scotch-Brite). Test in an inconspicuous area before attempting a main area on the job